CLICK ON PHOTOS FOR RIG SPECS!
MOBILE B61 HDX
General Description:
The B61 is known for its auger drilling prowess - it's one of the most powerful geotechnical drilling / environmental drilling / well drilling rigs available. Auto hammer, break out table, wiggle tail, mud and grout pumps are all on this rig. With a full 2017 re-build, this rig is a go-to for deeper hole drilling.
Rig Capabilities:
- Auger
- Air Rotary (ODEX)
- Mud Rotary
- SPT / DCPT / Shelby Tube / Vane Shear Testing
- Auto Hammer
- CPT Capable
Rig Specs:
- 35,300 pounds of retract force
- 20,000 foot pounds of rotary torque
Rig Dimensions:
- Height, Mast Raised: 15ft (4.6m)
- Height, Mast Raised, Derrick Up: 38ft (11.6m)
- Length, Mast Raised: 29ft (8.9m)
- Width: 8ft (2.4m)
Mobile B61 HDX
MOBILE B53
General Description:
The Mobile B53 truck rig is a powerful and dependable rig with lots of deck room to carry environmental supplies. This rig has a variable speed head for full rock coring capabilities and a a swing out auto-hammer for SPT/DCPT testing, able to complete a wide range of geotechnical drilling and environmental drilling projects.
Rig Capabilities:
- Auger
- Air Rotary (ODEX)
- Mud Rotary
- SPT / DCPT / Shelby Tube / Vane Shear Testing
- Auto Hammer
- CPT Capable
Rig Specs:
- 24,000 pounds of retract force
- 8,600 foot pounds of rotary torque
Rig Dimensions:
- Height, Mast Raised: 18ft (5.5m)
- Length, Mast Raised: 25ft (7.6m)
- Width: 8ft (2.4m)
CME 55
General Description:
The CME-55 is a class-standard drill rig used by geotechnical drilling and environmental drilling professionals for decades. Sometimes referred to as the swiss-army knife of drill rigs, this one can do it all.
Rig Capabilities:
- Auger
- Air Rotary (ODEX)
- Mud Rotary
- SPT / DCPT / Shelby Tube / Vane Shear Testing
- Auto Hammer
- CPT Capable
Rig Specs:
- 28,000 pounds of retract force
- 9,400 foot pounds of rotary torque
Rig Dimensions:
- Height, Mast Raised: 18ft (5.5m)
- Height, Mast Raised, Derrick Up: 26ft (7.9m)
- Length, Mast Raised: 27ft (8.2m)
- Width: 8ft (2.4m)
BOA 10M
General Description:
The BOA 10M has excellent Cone Penetration Testing (CPT) capabilities with a large cylinder driven mast. With capability to auger, ODEX and mud rotary, this rig can complete a wide range of geotechnical drilling and environmental drilling projects.
Rig Capabilities:
- Auger
- Air Rotary (ODEX)
- Mud Rotary
- SPT / DCPT / Shelby Tube / Vane Shear Testing
- Auto Hammer
- CPT Capable
Rig Specs:
- 9,000 foot pounds of rotary torque
Rig Dimensions:
- Height, Mast Raised: 26ft (7.9m)
- Length, Mast Raised: 25ft (7.6m)
- Width: 8ft (2.4m)